Door Latch Stuck In Door Frame (Causes & Solutions)

Door Latch Stuck In Door Frame

A stuck door latch is a deterrent to your daily routine and can be frustrating in emergencies. It also questions your safety in the house since opening and closing the door is now demanding.

Any door latch can be stuck, both those interior and exterior doors. So, when this happens, you must find ways to remove the stuck door latch. How do you then do this? This article will answer all your questions about dealing with a malfunctioning door latch.

Common Reasons for A Door Latch Stuck in The Door Frame

To find a solution to a stuck door latch, it’s vital that you get to the root of the problem first. Hence, you need to troubleshoot the issue before finding ways to resolve it. There are different reasons a door latch can get stuck, which may vary when the door latch is stuck in the door jamb or cannot keep the door closed. In addition, there are particular signs of taking notes that tell you the root of your door latch is stuck. We’ll discuss the most common varying reasons for a door latch stuck in this section:

1. Wrong Door Hardware Alignment

This primarily is the issue with a stuck door latch when attempting to open a closed door. The components of a door latch which include the strike plate, door knob, and latch bolt, all work to make it function well; however, where one of these components is misaligned, it may lead to a stuck door latch.

This may result from an issue with the foundation of your home or door expansion from moisture. Thus, when you try to open the door, the latch that extends to the strike plate’s hole does not enter the hole correctly. Therefore, you will need to employ additional force to make the latch fall into the hole, eventually resulting in the door latch being stuck.

2. Jammed Latch

A jammed latch resists opening and closing, meaning it cannot move freely as it used to. Hence, opening and closing the door becomes impossible since the latch has been stuck. The genesis of this issue is mostly not from the door or doorknob but due to a build-up of dirt and debris in the mechanism or lock components.

These dirt materials are usually rust or moisture stuck in the latch bolt so that the different components that make up the metal latch are jammed, and there’s no gap left for them to move freely. This is mostly friction between the other metals trying to make their way past the grime clog. While this is frustrating, it can be efficiently dealt with by cleaning up the lock mechanism.

Damaged LockMechanism
Image Credit: morningsidejoinery

3. Damaged LockMechanism

Sometimes the reason for your door trouble might cause damage to one of the parts of the lock mechanism. One or two parts may have broken or are too weak to be functional anymore. For example, the doorknob or through spindle may be broken so that it’s disconnected from the latch or clogged or damaged lock cylinder. Additionally, several parts of the lock could be broken or damaged.

In this case, the latch has no issues. Instead, the internal locking mechanism requires attention. And a common sign of this is the latch still going in and out when pushed as it usually would. When this happens, the easiest way to resolve it is by changing the locks and buying higher-quality lock products.

4. Loose Doors Hinges

If you live in an old house, this might be the reason your door is stuck and can’t open or shut freely. Unfortunately, most people ignore the door hinges at the upper part of the door, which may have loosened from constant usage. The door may get jammed when this happens because it tilts from imbalance. If this is the case, you need to tighten the screws holding the hinges or use new screws if the old ones are no longer usable.

Methods Of Removing Stuck Door Latch in Door Frame

Now that you know the root of the problem with your door latch, the next step should be resolving it. When in this state, avoid forcing the door open as this may damage your door, latch, or the locks. You can do various DIY fixes without the tools in your home or get a few additional materials to make the process less straining.

Using Lubricant to Remove Specks of Dirt
Image Credit: reup_with_lit

1. Using Lubricant to Remove Specks of Dirt

When you’ve discovered that your door latch is stuck due to a build-up of materials such as dirt and debris, you can resolve it by using the WD-40 lubricant in the following steps:

  • Get WD-40 from any local hardware shop near you
  • Spray it onto the opened areas of the latch, let it get into the internal mechanism, and wait a while for the lubricant to do its work.
  • Once you’ve got the spray in, turn the door’s handle or knob and try opening or closing the door to check if the latch is loosened.
  • The lubricant unclogs the internal mechanism’s dirt if the friction is less. Otherwise, you’ll need to apply more WD-40 and wait longer for the lubricant to work.
  • Once done, you should be able to open and close your doors without restrictions. You may also occasionally apply any graphite lubricant to the locks to avoid future rust or clogged-up dirt.

2. Cleaning the Locks

An alternative to the above method is cleaning the locks of rust or grimes stuck inside. Usually, vinegar is the most effective way of cleaning off and removing debris or dirt from anything. Its vital acidic component also helps in dissolving rust. Here’s how to go about it:

  • Deep a cotton ball into vinegar, use it to clean the lock, and wait for the vinegar to sit in the lock until the gunk starts dissolving.
  • After a few minutes, use a sharp object like a needle, toothpick, or a small brush to clear out residue dirt from the lock.
  • Finally, wash out the dirt with warm water, then dry the locks with a soft dry cloth. After this, the latch should be free and working perfectly again. Also, you can incorporate regular lock cleaning into your daily routine to prevent frequent blocks and your work latch from getting stuck.

3. Realigning the Strike Plate

The latch bolt, which extends to the strike plate, usually does not fall into the hole. This is generally because the strike plate is misaligned and will lead to the latch getting stuck. So, to resolve this problem, you will have to realign the strike plate:

  • First, unscrew the strike plate from its place in the door frame.
  • Then, check the hole where the door latch should go into the hole of the strike plate.
  • Align the strike plate to meet the latch where it lands into the hole. Drill other screw holes in the strike plate to screw it back in place
  • Ensure the strike plate aligns with the door latch and screw it back in the door frame.
  • Check the door latch to see if it works properly now.
Tightening Loosened Screws
Image Credit: workshop.127

4. Tightening Loosened Screws

Sometimes, people make the mistake of leaving loose screws out when installing door locks. This may cause the door latch to get stuck. To fix this;

  • Get a screwdriver that fits the size of the screw.
  • Inspect the nooks and crannies of the door and locks for any loosened screws properly
  • Tighten all the screws that you’ve observed to be loose. The door latch should work perfectly after this.

5. Use a Screwdriver to Loosen the Latch

If the latch doesn’t loosen from other methods, you can use a screwdriver or utility knife. However, you must be careful not to break the latch or other parts of the lock and door in this process.

  • Insert the screwdriver into the gap between the latch and the door frame.
  • Twist and turn the screwdriver in the gap until you feel the latch loosen.
  • Once it is loosened, hit the screwdriver slightly with a hammer to pop the door open. However, this temporary method may not prevent future jams or stuck door latches. So, after you’ve popped the door open, endeavor to look into the cause of the problem and repair the latch.

6. Replace the Locks

It may be hard to repair if the lock components or mechanisms are damaged and broken. Thus, where one part of the internal mechanism is broken, the best thing is to replace the locks. However, when you keep repairing damaged locks, they are more susceptible to damage and require frequent attention. So, the best decision to make for a part of a broken lock is to get new ones. You can purchase them from any local hardware store near you and contact a locksmith to install them.


With the different methods espoused above to remove a door latch stuck in the door frame, you can now resolve any lock problems with your door. Your first bet is to troubleshoot and diagnose the problem to know the best step to follow the instructions and solve the problem. However, in extreme situations with a dead latch or damaged locks, you may need to contact a professional locksmith to look into it.

Similar Posts